Fisher Paykel CMOTTKFP Manual de instalación

Busca en linea o descarga Manual de instalación para No Fisher Paykel CMOTTKFP. Fisher Paykel CMOTTKFP Installation Instructions Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
FISHER & PAYKEL CONVECTION MICROWAVE TRIM KIT
INSTALLATION INSTRUCTIONS
Before installing trim kit, install the convection duct as follows:
1. Insert the rear section of the duct into the forward section of the duct and install 4 screws supplied
(Fig. 01).
2. Install foam tape on 2 flanges of the rear section of the duct (Fig. 02).
3. Remove and retain the 2 top screws, left and right, located at the rear vertical edges of the Microwave
(Fig. 03).
4. Place the duct on top of the Microwave and reinsert the 2 screws removed in Step 3 (Fig. 04).
Before you begin, read these instructions completely and carefully.
Getting Started
Remove packaging
Contents Tools Required
Part Description Qty
Trim Assembly 1
Base 1
Rear Duct 1
Forward Duct 1
Foam Tape 2 ft
Mounting Bracket (L/R) 2
Sheet Metal Screws 14
1/8” Drill
#2 Phillip Screwdriver
Fig. 01
Fig. 02
Fig. 03
Fig. 04
4 Screws
Foam Tape
Foam
Tape
Vista de pagina 0
1 2 3 4

Indice de contenidos

Pagina 1 - INSTALLATION INSTRUCTIONS

FISHER & PAYKEL CONVECTION MICROWAVE TRIM KITINSTALLATION INSTRUCTIONS Before installing trim kit, install the convection duct as follows:1. Inser

Pagina 2 - Installing Trim Kit

Installing Trim Kit1. Cut opening in the cabinet face per the following dimensions:Height: 19-3/16” + 1/16”, –0Width: 25-3/4” + 1/16”, –0Note: Refer t

Pagina 3 - Stainless Steel Care

Stainless Steel CareThis Trim Kit is made of stainless steel. Start with hot soapy water,rinse and dry. If the trim kit has food soil remaining,

Pagina 4 - P/N 242602 Rev. B 06/14

P/N 242602 Rev. B 06/14

Comentarios a estos manuales

Sin comentarios