Fisher & Paykel OR24SDPWGX1 Guía de instalación descargar pdf (Pagina 8)

LEVELLING THE RANGE

The range is equipped with 4 LEVELLING FEET (supplied in a separate kit) and may be

levelled by screwing or unscrewing the feet (fig. 1.8).

It is important to observe the directions of figures 1.6, 1.7a, 1.7b.

+ 5/16"

+ 8 mm

+ 5/16"

+ 8 mm

0 mm

+ 11/16"

+ 17.5 mm

Fig. 1.6

Fig. 1.7a Fig. 1.7b

Fig. 1.8

ANTI-TIP STABILITY DEVICE INSTALLATION INSTRUCTIONS

1. The anti-tip bracket has to be attached as shown on figure below (only rear left side),

it has to be fixed on the floor and on the rear wall by no. 4 (four) suitable screws (not

supplied).

2. After fixing the anti-tip bracket, slide range into place. Be sure the rear left foot slides

under the anti-tip bracket attached.

(223 mm)

8" 25/32

Dotted line showing the position

of the range when installed

ANTI-TIP STABILITY

DEVICE FIXING

Rear left

feet of range

Fig. 1.9

Anti-tip stability

device

Supplied with the range

in a separate kit

Supplied with the range

in a separate kit

YOU MUST USE STABILITY

ANTI TIP BRACKET TO

PREVENT UNIT FROM

TIPPING.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Sin comentarios

Fisher & Paykel OR24SDPWGX1 Guía de instalación Pagina 8